mini-Zenith Stand Alone Universal Tone Arm鑽石軸承 單點支撐 機械懸浮唱臂

唯一可以在播放中調整超距，減少循軌誤差的High-End 唱臂。

優點

1、超高自由度，循軌能力極佳

獨特鑽石軸承 單點支撐 機械懸浮設計，超高自由度，唱臂可輕鬆移動，循軌能力特佳，突破有效質量與摩擦力必成正比的難題；如四兩撥千金般，讓MC唱頭輕鬆的正確循軌，完美再現LP類比錄音的優質美聲。

 

2、循軌誤差極少，效果媲美正切唱臂

有效長度365mm，Zenith Angle誤差小，在LP的播放當中，可隨時調整超距，減少內外圈Zenith Angle的差異，循軌誤差極少，效果媲美正切唱臂，操作簡單又有效率。

 

3、完全獨立唱臂，可降低唱盤振動影響

獨立唱臂，可完全阻絕唱盤所產生的震動，減少背景雜音，聲音純淨無音染，可輕易鑑別不同唱頭的風味。

4、高有效質量，低頻表現紮實

唱臂有效質量高，低震動、低共振，頻域表達平順; 除了中高頻細節清楚之外，更有紮實的低頻表現。

5、 運用重力，永保唱頭水平

應用重力垂重效果，可隨時維持唱頭正確的Azimuth Angle，減少左右聲道溝槽磨損不均以及音量不平衡的問題。

6、有聽無類，專治不平唱

鑽石軸承 單點支撐 機械懸浮設計，自由度極高，對於彎曲的唱片仍能發出完美聲音，不怕唱片不平。

7、適用於所有轉盤的Universal唱臂

無論配合一般或頂級的唱盤，mini-Zenith唱臂皆可輕易大幅提昇您現有音響系統的等級。

8、調整空間彈性大，配件齊全，可與各式各樣的唱頭搭配

不同的唱頭有專屬的配重可配合，可輕易搭配質量不同的唱頭， 針壓可調整的範圍也很大。

 

規格

  1. 有效長度〈effective length〉365mm 約14吋
  2. VTA可調〈靜態與播放中〉，粗調精度0.1mm，細調精度0.03mm，總調整範圍35 mm
  3. HTA可調〈靜態與播放中〉
  4. 唱臂軸承與唱盤軸心距離可調，〈靜態與播放中〉，粗調精度0.1mm，細調精度0.03mm，總調整範圍25 mm
  5. 有效質量可調〈靜態下〉，可依唱頭的種類調整最有利的唱臂質量

mini-Zenith Stand Alone
Universal Tone Arm

Question: “Can only the sliding tangential tone arm maintain correct tracking?”

Question: “Is there any other method for correcting the phase difference between the inner track and outer track of the vinyl whilst playing using the pivot arm?”

Answer: mini-Zenith Stand Alone Universal Tone Arm is the optimal solution to this problem. The mini-Zenith Stand Alone Universal Tone Arm uses a diamond bearing single point support to achieve mechanical suspension.
?? The user can at any time, either with the turntable at rest or during play, adjust the relative distance between the pivot point and the centre of the turntable to effectively eliminate the error in the horizontal tracking angle (HTA) between the inner and outer tracks.

The mini-Zenith Stand Alone Universal Tone Arm has the following features:

Very high pivot freedom allowing for excellent tracking ability

Unique diamond bearing single point support to achieve a distinctive mechanical suspension design. Due to the diamond bearing single point support the friction of the bearing is minimal, allowing for a greater liberty of movement for the pivot. Thus the tone arm has tracking ability of extraordinary quality; even when the inertia mass is increased, the tracking ability remains stable because there is no corresponding increase in friction. The result is that we can provide an ideal platform for the MC cartridge to track exactly and to perfectly reproduce the LP analogue recording.

The Zenith Angle (or HTA) error is minimal:

The HTA error is sufficiently small because the effective length is unusually long (365mm - about 14 inches). Furthermore, the user can reduce this sufficiently small HTA error even further through turning a button to adjust the relative distance between the pivot and the spindle so minimizing the HTA difference between the outside track and the inside track even while the vinyl is playing.

Through precise calculation, the different HTA error rates of the inner and outer tracks can be corrected respectively by simply turning a knob. All necessary mini-Zenith operations are simple and effective.

A complete stand alone tone arm can efficiently reduce the transmission of vibrations of the turntable to the tone arm:

Because the tone arm stands completely separate from the turntable, the only contact point between the tone arm and the turntable is the stylus; this minimizes any interference from the vibration of the turntable, thus dramatically reducing background noise. Because the mass of the tone arm is relatively high, with low vibration and low resonance, we can achieve pure reproduction without coloring of the sound such that we can easily differentiate the corresponding? characteristics of various? cartridges.
The expression of different frequency spectrums is of equal quality such that high frequencies are captured in great detail whilst the response of low frequencies is solid and sharp / crisp.

Using the effect of gravity from a single point support mechanism we can always maintain a precise azimuth angle for the cartridge and we can protect the stability of the tone arm from vibration.

Using the effect of gravity we can always maintain an exact azimuth angle to reduce the problem of volume difference between the right channel and the left channel. In addition, due to a lowered centre of gravity of the tone arm relative to the pivot point we can conquer the vibration problem of the tone arm – even in a groove with a large dynamic range the tone arm is still very stable.

Other characteristics:

mini-Zenith Stand Alone Universal Tone Arm can easily be adapted to fit any kind of turntable – low cost or high class, we can dramatically improve the quality of your current audio system:

The capacity for adjustment becomes extensive with a complete range of accessories: In order to be compatible with different cartridges, we provide different balancing weights – however, the optimal balance of the tone arm can also be achieved with various different weights regardless of the weight of any particular cartridge with which the tone arm is coupled.

Despite the fact that the adjustable range of the stylus pressure is very large we can also adjust the resonance characteristics of the tone arm through adjusting the mass of the tone arm whilst maintaining the same balance.

mini-Zenith
Jenyie Corp
187, Da-chang 2nd Road,
Kaohsiung City, 807
Tel: 07-3987132
Fax: 07-3701842
Cell: 0936450272
Email: chenjenyie@seed.net.tw
Web: www.mini-zenith.com

 

 


Limited Warranty

Congratulations! You have wisely chosen the highest quality mini-Zenith product as the optimal equipment for reproducing the beautiful sound of vinyl records. All mini-Zenith products use the most concise parts, and the most effective techniques, combining precise technology and delicate art to pursue the perfect reproduction of musical recordings.
All parts of the mini-Zenith products are made under strict quality controls. We use the best materials available, irrespective of the cost, to achieve the optimal specifications and function. This mini-Zenith product, model number _mini-Zenith Stand Alone Universal Tone Arm_, and the accessory parts listed below will have a _5 year_ limited warranty. The details of the limited warranty are as below:

  1. The limited warranty will guarantee the mini-Zenith product under normal playing circumstances. We guarantee free service for all malfunctions occurring during normal usage for the full _5 year_ term of the warranty.

 

  1. If the cause of the damage is unrelated to product quality, mini-Zenith still endeavor to make all possible efforts to correct all functions that may be correctable. However, we do not provide a free guarantee for this kind of damage, for example (a) if the damage is due to a strong traumatic force such as a direct blow, (b) if the damage is due to a fall such as might occur through mishandling, (c) if the damage is due to the effect of water on any part of the mini-Zenith product, or other damage due to forces outside of reasonable control (e.g. typhoon, earthquake, tsunami, flooding, or acts of terrorism etc...).

List of Accessories:

  1. SMA to RCA signal cable: one set comprising two cables.
  2. Digital scale to measure stylus pressure: one set (not including battery).
  3. Spirit-level: one set.
  4. Balancing weights: one set comprising five weights.
  5. Tweezers: one set.

 

Precautions:

After assembly, never lift the tone arm by any angle greater than thirty degrees because this will result in the diamond bearing sliding out of the bearing’s base and cause the tone arm to fall from the pivot damaging the delecate wiring between the tone arm and the base – wiring which has a diameter of only 0.1 mm.